Australian Dollar
This Aguzzo® Stainless Steel Heated Towel Rail has round rails and modern rectangular wall brackets. Its compact 600mm width is perfect for smaller bathrooms. It boasts 10 x horizontal bars to provide high heat contact to the towels so they are warm and dry in minimal time. Unlike lightweight and lower grade steel heated rails, Aguzzo® rails are made from thick heavy duty stainless steel. This provides a more durable product and heat retention is much better due to the thicker steel.
The luxury "Brushed Nickel Finish" is achieved by hand brushing the stainless steel surface and applying a specialist durable clear protective coat to provide a smooth feel. This finish perfectly matches the Brushed Nickel Finish of contemporary designer bathroom tapware.
Note: Heated towel rails are heated within safety limits and provide ambient heat. Towels and robes will be warmed where they are in contact with the heated rails. The unit is not designed to heat a space or room.
- Contemporary - the Aguzzo® round bar heated towel range is a very traditional design with clean straight lines that complement any round style bathware ranges
- Compact - Get the most from small bathrooms - only 600mm wide yet plenty of storage with 10 heated bars
- Efficient- Only 110 watts power consumption
- High surface area - with 10 horizontal bars your towels will warm fast
- Safe - full electrical safety compliance and licencing with with AS/NZ: 60335 and c-tick requirements. The latest in heating technology provides an even surface heat - the bars are dry and not filled with liquids or oils, so you can even dry delicate garments. The surface can heat to 55ºC, being hot but not scalding - see attached instructions for more safety information.
- Brushed Nickel finish - achieved by hand brushing the stainless steel surface and then applying a hard wearing clear protective coat to provide a smooth feel to the touch - perfectly matches "Brushed Nickel" contemporary tapware.
- Waterproof - IP55 rated to withstand water sprays - a great choice for the bathroom
Key specifications
- Dimensions: 600mm width; 920mm height; 110mm depth (from wall)
- Rails: Vertical tubes are Ø30mm, Horizontal rails are Ø17mm
- Power: 240V - 110 watts. Includes 1.5m black power cord and plug
- Control: Must be controlled by wall switch or programmable timer (sold separately)
- Wiring: Dual Wired - see installation instructions below.
- Surface temperature: up to 55º C
- Water-proof rating: IP55 (independently tested to withstand water sprays and splashes)
- Compliance: Electrical safety standards AS/NZ 60335 and C-tick
Dimensions
Installation: Choose to "Plug In" or "Conceal Wire"
You have two installation options:
(1) Plug In - Simply attach to wall and plug in the power cord to a power point
(2) Conceal Wire - Have your electrician hard wire the provided cord and EZY-FIT plug to power source and suitable switch or timer (sold separately). When you are ready to install simply plug the product into the EZY-FIT plug, which is concealed inside the wall bracket) and attach product to wall!
Installation Instructions
Click on the book to download the instruction manual (PDF) for this product.
If hard-wiring, the power supply must be wired to a switch or controller installed by a licensed electrician.
Warranty
5 year manufacturer warranty against manufacturing faults. Conditions apply - see product documentation and Returns and Warranties Policy.
Click on the icon below to view the detailed Care and Warranty Information for this product.
